StarTech SATA Dual Hard Drive RAID Adapter - Internal SATA Connector to Dual SATA HDD RAID Controller Card
Web ID: 17614
Connect two SATA Hard Drives to a single internal SATA connection, and build a RAID array for accelerated performance or secure data redundancy - Internal Drive Mounted Dual SATA Hard Drive RAID Adapter ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: S322SAT3R
GTIN: 65030857529
Manufacturer Website
The S322SAT3R internal drive-mounted SATA RAID adapter lets you connect two SATA hard drives to a single SATA connector on your motherboard, and build a hardware RAID array.
This versatile RAID adapter features a built-in hardware RAID controller, supporting JBOD, BIG, RAID 0, and RAID 1 -- to achieve greater drive capacity, secure data redundancy or improved system performance.
With two included SATA cables you'll have everything you need to ensure a hassle-free installation. This plug-and-play HDD adapter is easy to install, mounting directly to your drive without any additional hardware or software installation.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD RAID controller supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
The S322SAT3R is backed by a StarTech.com 2-year warranty and free lifetime technical support.
| Ports | 2 |
| Connector(s) | |
| Drive Connectors | SATA (7 pin, Data) Plug |
| Host Connectors | SATA Data & Power Combo (7+15 pin) Receptacle |
| Environmental | |
| Humidity | Operating 20? to 80? Non Operating 15% to 90? |
| Operating Temperature | 5?C - 50?C (41?C to 122?C) |
| Storage Temperature | -25?C - 70?C (-13?C to 158?C) |
| Hardware | |
| Chipset ID | Jmicron - JMS562 |
| Compatible Drive Types | SATA |
| Drive Installation | Fixed |
| Interface | SATA |
| Number of Drives | 2 |
| Packaging Information | |
| Shipping (Package) Weight | 120 g [4.2 oz] |
| Performance | |
| General Specifications | For JBOD mode, your SATA controller must support Port Multiplier |
| Hot Swap Capability | No |
| Max Drive Capacity | Currently tested with up to 4TB 7200 RPM hard drives |
| Maximum Data Transfer Rate | 6 Gbps |
| Port Multiplier | Yes |
| RAID | Yes |
| Supported RAID Modes | BIG (Spanning or Concatenation) |
| JBOD - (Just a Bunch of Disks) | |
| RAID 0 (Striped Disks) | |
| RAID 1 (Mirrored Disks) | |
| Type and Rate | SATA III (6 Gbps) |
| Physical Characteristics | |
| Product Height | 23 mm [0.9 in] |
| Product Length | 75 mm [3 in] |
| Product Weight | 11.8 g [0.4 oz] |
| Product Width | 26 mm [1 in] |
| Software | |
| OS Compatibility | OS independent; No software or drivers required |
| What's in the Box | |
| Included in Package | Installation Guide |
| Internal Drive Mounted Dual SATA Hard Drive RAID Adapter | |
| LP4 to SATA Power Adapter | |
| SATA Cables (50cm) | |
